Ortur Laser Master is a portable laser engraving machine, which is easy to install and safe to operate. It has a built-in G-sensor. When the machine tilts, it will automatically stop laser work and protect against laser damage. Support for GRBL open source software for operating fun. It supports dynamic control laser module, and PWM power regulation, low brightness regulation. It also supports lasers of different powers, so that this is a great device for DIY project.
- 32-bit Motherboard with STM32 chip, more powerful, faster, higher precision. Easy to adjust the speed (0-3,000mm/min) and power (S0-S1,000) for both of engraving and cutting.
- Active position protection, there is a G-sensor on the motherboard for active position protection. If the machine detects unauthorized movement, the laser beam will stop.
- Laser beam safety guard, if your computer system halted, led to that the laser engraver stop moving, the laser beam will stop.
- Exposure limitation, after the laser beam is turned on, but there is no movement for a long time, it will automatically stop. Weak Light Mode: the laser beam automatically stops after 100 seconds. None Weak Light Mode: based on the power level, the laser beam automatically stops within 10 to 60 seconds.
- LaserGRBL is the most popular carving software in the world, could import different format images, you could editing in PhotoShop, Inkscape, CAD, etc. and then connect to the laser engraver via LaserGRBL for engraving and cutting.
- This laser engraver supports PWM mode.
- Pre-assembled parts, just need 5-10 minutes to install the machine.
- 160 x 150 mm engraving area.
- Aluminum profile + acrylic materials machine body.
Image format: NC, DXF, BMP, JPG, PNG
Operating system: Win XP, Win 7, Win 8, Win 10
Image size: No Limit ( The pixel accuracy could be adjusted freely, and the default is 300 pixels per inch, it's about 0.81 um pixel precision )
Power adapter output voltage: 12V
15W carving: wood, bamboo, cardboard, plastic, leather, PCB, aluminum oxide, non-reflective electroplating and paint finish metal, blackened art knife.
15W cutting: cardboard, non-woven fabric, thin wood chips, some thin plastic sheets, etc.
LightBurn ( paid software, lightburnsoftware.com ) supports Windows, Mac OS, and Linux. It's the most popular paid carving software in the world, very easy to use.
1.Please wear goggles when operating the machine.
2.Please do not touch the laser emitter with your hand, or it may burn your hand.
3.Please avoid strong impact on the machine.
4.Children under 14 are not allowed to use this product and children over 14 need adult supervision.
5.The light engraving machine cannot be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.
This product is not recommended for industrial cutting due to its high engraving speed.
Click here to download the manual
Model Number: Laser Master 15W
Type: Laser Engraving Machine
Material: Aluminum + Acrylic
Laser Wavelength(nm): 445 ± 5nm
Laser Power: Electrical Power: 15W, Luminous Power: 4000-4500 mw
Laser Reaching Range: 160 * 150mm
Power By: Power Adapter 12v 3A
Product size (L x W x H): 38.70 x 27.20 x 13.30 cm / 15.24 x 10.71 x 5.24 inches
Package size (L x W x H): 44.00 x 26.00 x 12.00 cm / 17.32 x 10.24 x 4.72 inches
The customer is responsible for writing the correct shipping address to us. If delivery fails due to the shipping address being incorrect or incomplete then we will not be able to refund you as the parcels are usually destroyed and not return to us, especially for international deliveries.
We will replace or refund items if they are defective or damaged at no extra cost to you. To return your product, you should email us for a return address and label.
Otherwise, you will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
Depending on where you live, the time it may take for your exchanged product to reach you may vary.
If you are shipping an item over $80, you should consider using a trackable shipping service or purchasing shipping insurance. We don’t guarantee that we will receive your returned item.
To protect both the buyers and sellers, it will take about 24 hours for OShopee to verify the payment. After verification, all the items will be sent out within 2 days or as soon as possible. Free shipping on all countries, ESTIMATED DELIVERY 7-15 DAYS. If you need faster shipping, please contact us in advance before placing your order.
Customers will pay local import tax and custom charges from your local Post office. Customs regulations vary by country and not all carriers ship to all locations.
Our policy lasts 15 days. If 15 days have gone by since you received your order, then unfortunately we can’t offer you a refund or exchange.
Customers must allow at least 4 weeks for delivery from their order date before disputing an order or requesting a refund.
To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Cancellations must be made within 24hrs of your order, if your request for cancellation is made after 24hrs it is likely the parcel has been shipped so we can not guarantee that we can cancel the order.
Inquiry or Problem?
Email Us email@example.com